13
To exit DTMF navigation mode:
• press the pound (hash) key twice as follows:
##
The message "DTMF menu navigation disabled" appears briefly at the bottom of the auto attendant display.
When in DTMF navigation mode, you will not be able to use the number keys to enter the numeric ID of a recording.
Typically, you will have these options:
Record this session
This option enables you to record the video your endpoint is sending to the IP VCR. You will be presented with the
recording console (see Using the recording console). From here you will be able to monitor your video before and during
recording.
Replay a recording
All recordings stored on the IP VCR in the current folder display here, listed in the order of most recently made first.
The default auto attendant corresponds to the top-level (root) folder.
Unless a recording is PIN-protected, highlighting a recording will show a small preview.
If you select a protected recording, you will be presented with the PIN entry screen, and will hear audio prompts playing.
Use your endpoint's numeric keypad to enter the PIN, followed by #. (Note that some endpoints require you to activate
the keypad before dialing, for example by pressing the # key.)
Access other folders
If the IP VCR has been configured with a hierarchy of folders, you can access child folders of the current location, giving
you access to the recordings in those folders.
When you have finished watching a recording or making a new recording, simply hang up. If you need to make or watch
another recording, you will need to make a new call to the auto attendant.