29
currently viewing. up option to go up one level in the folder
hierarchy.
To view a list of stored recordings in a folder, click
the name of the folder.
Stored recordings
The Stored Recordings table displays a list of all recordings stored in the folder that you are currently viewing.
The following information is displayed for each stored recording.
Field Field description Usage tips
Watch Displays the recording streaming page. Some
recordings may require a PIN to access this feature.
See Using streaming to view recordings for more
information.
Name The name of the recording. Depending on how the
recording was made, this will be a name entered by
the user, or a name chosen automatically by the IP
VCR.
You can rename a recording by clicking its entry in
the list and editing the name field (see Viewing and
updating recording details).
Location Whether the recording is internally or externally
stored.
See Storing recordings externally for more
information.
Status A brief indication of whether this recording is in use
(recording or playback in progress), or not. If this
recording is currently being transcoded to
streaming format, this is also indicated.
If you have sufficient access rights, a stop link is
displayed next to the status for active recordings.
To stop the recording, click the link. A
confirmation message is displayed.
A recording that is not being made or played back
is referred to as Idle.
Invalid media indicates that the recording is partially
invalid. For example, the recording might be valid
but the streaming media could be invalid caused by
power loss to the IP VCR during the transcode.
Truncated streaming media indicates that the IP VCR
was shut down during the transcoding of the
recording to streaming format.
If there is a problem with the streaming media, you
can start the transcode again by using the
Transcode to streaming format button on the
recording's details page.
Numeric ID The Numeric ID of the recording, if it has one. You can edit a recording's details to allocate it with
a Numeric ID (see Viewing and updating recording
details).
Registration If a recording has a Numeric ID set and that ID is
configured to register with an H.323 gatekeeper
and/or a SIP registrar, this field shows the state of
To register a recording with an H.323 gatekeeper,
the IP VCR must be configured with a gatekeeper