45
Viewing connection status
Extended details about active connections may be viewed on the connection status page. To view these:
1. Go to Connections.
2. Click a connection name to display the connection status page.
An overview of the connection status is shown on this page. Basic connection details are shown, as well as per-endpoint
details. For playback and direct recording connections, information for just one endpoint is shown; for point-to-point
recordings, information for both endpoints is shown. Refer to the sections below for more details:
• Connection status
• Endpoint status
• Extended endpoint information

Connection status

For each connection, basic information is displayed, such as when playback or recording started.

Endpoint status

Endpoint specific information is displayed for each endpoint associated with a connection. For playback and direct
recording connections, information for just one endpoint is shown; for point-to-point recordings, information for both
endpoints is shown. The same information is shown whether one or two endpoints are displayed.
Endpoint information is not available for streaming playback connections.

Extended endpoint information

Further endpoint information and control can be accessed via the page tabs. Refer to the following sections for more
details:
• Viewing a connected endpoint's display
• Viewing a connected endpoint's camera
• Viewing a connected endpoint's audio signals
• Viewing a connected endpoint's media statistics
• Viewing a connected endpoint's diagnostics