Call Setup via Default Services
TANDBERG ENTRYPOINT USER GUIDE
About Default Services
The Entrypoint is equipped with a number of persistent default services, i.e. services stored in the
be available after a system restart. The following persistent default services can be distinguished:
• Direct Inwards Dialling (DID) – Defines a |
and an outbound number. |
• Dial Extension (IVR) – Also known as |
Interactive Voice/Video Response (IVR), |
defines a relation between an inbound |
number and an interactive service, i.e. a |
menu, via which an outbound service can |
be connected to. The outbound service |
can be an audio or video service or an |
externally connected endpoint. |
• Menu service – A menu based call |
directory. |
• TMS Corporate Directory (phone book) – A |
connection with the installed TANDBERG |
Example Hotline
Entry details:
Enabled: Check
Name:
Net Type: H.324m
Prefix: 67890000 Suffix:
Service Type: Direct Inwards Dialling Arguments:
Net Type: H.323
AV Mode: Auto + fallback to audio
Prefix: 51234 Suffix
Use Remainder: No
Allow Forwarding: No
Example
DID – Direct Inward Dialling
When dialling number 67890000 this will match without leaving a remainder. The H.323 number that will be connected to will be: 51234 (construction: prefix). When dialling number 67894321 there will be no match. When dialling number 678900009876 one is also connected to the same H.323 endpoint, since there is a match on 67890000 and the remainder, i.e. 9876, is discarded. Note that Use Remainder is set to No!
Dial Extension (IVR) Example
Management System (TMS) phone book |
is set up. Via the phone book menu an |
outbound call to another endpoint, e.g. a |
3G Mobile, H.323 or SIP endpoint, can be |
set up. |
Table of | Trademarks & | Patents & |
Contents | Copyright | Disclaimers |
|
|
|
D 14050.04 |
|
|
10.2007 |
|
|
1.A 3G handset user calls a Dial Extension service number.
2.The Entrypoint activates the Welcome screen and sound.
3.The Entrypoint, when set in the dial plan, shows the DTMF Information screen.
4.The 3G handset user enters the extension (H.324m, H.323 or SIP alias) followed by the #
5.The Entrypoint starts to call the endpoint and the Connecting picture and sound are activated.
6.When the call is connected audio and video are transmitted through the Entrypoint.
Safety/ | To Get You | Using the | Viewing the | Configuring | Maintenance | Services | Dial Plan | Contact | |
Environmental | Up and Going | Entrypoint | System Status | the Entrypoint | & Upgrade | Examples | Information | ||
|
20
