Technical Specification
Reference Guide: TT128x High Definition Professional Receiver/Decoder Page B-23
ST.RE.E10141.5
B.9 Compliance15 B.9.1 Safety
This equipment has been designed and tested to meet the requirements of
the following:
EN 60950 European Safety of information technology equipment.
IEC 60950
International Safety of information technology equipment.
In addition, the equipment has been designed to meet the following:
UL 60950
USA Safety of information technology equipment.
B.9.2 EMC16
This equipment has been designed and tested to meet the following:
EN 55022
and
CISPR22
European
International
Emission Standard
Limits and methods of measurement of
radio frequency interference
characteristics of information
technology equipment - Class A.
EN 61000-3-217 European Electromagnetic Compatibility (EMC),
Part 3 Limits; Section 2. Limits for
harmonic current emissions (equipment
input current ≤ 16 A per phase).
EN 61000-3-317 European Electromagnetic Compatibility (EMC),
Part 3. Limits; Section 3. Limitation of
voltage fluctuations and flicker in low
voltage supply systems for equipment
with rated current ≤ 16 A.
EN 55024 European Information technology equipment -
Immunity characteristics - Limits and
methods of measurement.
FCC USA Conducted and radiated emission limits
for a Class A digital device, pursuant to
the Code of Federal Regulations (CFR)
Title 47-Telecommunications, Part 15:
Radio frequency devices, subpart B -
Unintentional Radiators.
15 The version of the standards shown is that applicable at the time of manufacture.
16 The EMC tests were performed with the Technical earth attached, and configured using recommended cables.
17 Applies only to models of the Product using ac power sources.