Introduction
Reference Guide: TT128x High Definition Professional Receiver/Decoder Page 1-5
ST.RE.E10141.5
• Data:
DTS audio detection and pass-through.
Low Speed Data: RS-232 asynchronous (up to 38.4 kbit/s).
High Speed Data: Ethernet Data-piping (up to 5 Mbit/s) (option).
High Speed Data: RS-422 synchronous (up to 2048 kbit/s)
(option).
• Transport Stream Output:
ASI Transport Stream output with maximum data rate 160 Mbit/s.
• Remote Control:
SNMP.
RS-232 (Alteia protocol).
• Clock/Calendar:
Available to co-ordinate universal and local time.
Constantly updated when locked to a valid Transport Stream.
• Transport Stream Demultiplexing:
Maximum capability is 160 Mbit/s, depending on CA in use and
input front end.
• Video Decoding:
Maximum Video decoding capability of 50 Mbit/s.
• Audio:
Audio embedding in the digital video output (compressed AC-3 not
supported).
• VANC data support:
Closed Captions.
VITC.
• Frame Synchronisation of video output to a composite analogue input.
• Local Control Methods:
Front Panel User Interface.
1.2.2 Inputs
ASI Input (Decoder)
One BNC connector supporting both byte-mode and single packet burst
mode.
SSI Input (Decoder)
One BNC connector providing SMPTE 310M compliant input.
Remote Control
An RJ-45 Ethernet connector for connection to a PC or network switch to
provide SNMP control.
QPSK L-Band Inputs (Satellite Receivers) (Option)
Two F-type connectors connect the L-band output of a suitable LNB either
directly or via a suitable attenuator giving lightning and surge protection.