Operating the Equipment Locally
Page 3-14 Reference Guide: TT128x High Definition Professional Receiver/Decoder
ST.RE.E10141.5
3.7.7 Setting Up Closed Captions
Table 3.17: Setting Up Closed Captions
Step Action Result
1 Scroll to Menu 3.8.2 and edit the parameter
for enabling Closed Captions pass through
(ENABLED or DISABLED). Press Save.
Edits the parameter for enabling Closed Captions pass-through.
3.7.8 Setting Up VITC
Table 3.18: Setting Up VITC
Step Action Result
1 Scroll to Menu 3.8.1 and edit the parameter
for enabling VITC pass through (ENABLED
or DISABLED). Press Save.
Edits the parameter for enabling VITC pass-through.
3.7.9 Setting the PCR PID Menu
Table 3.19: Viewing the PCR PID Menu
Step Action Result
1 Go to Menu 3.9 and scroll to USER PID and
edit the PID for enabling manual selection of
the PCR PID.
Gains access to the selection between automatically detected
PCR PID or manually entered PCR PID.
3.7.10 Viewing the Network ID Menu
Table 3.20: Viewing the Network ID Menu
Step Action Result
1 Go to Menu 3.10. Gains access to the Network ID and the Original Network ID.
3.8 Setting Up the Conditional Access/Scrambling (Menu 4)
3.8.1 Introduction
Menu 4 allows the status and configuration of the Conditional Access (CA)
module to be checked. The structure and content of this group depends on
the CA system. The available CA options are as follows:
• Basic Interoperable Scrambling System (BISS), Mode 1 and Mode E
only.
• Remote Authorisation System (RAS) and RAS 2
• TANDBERG Director
• DVB Common Interface