TANDBERG PrecisionHD 1080p/720p camera | Camera User Guide |
Contentsontents
IntroductionIntroduction
PhysicalPhysicalInterfaceiinterfacet rf
Cablesables
ConnectiConnect toto codec
Videoideo forformatsats
Daisyaisy chainingchaining
Appendicesppendices
Contactontact usus
The PrecisionHD 1080p 12X/4X camera
The orange LED illuminates while in a call and flickers when there is an incoming call.
The lens hood is detachable.
We recommend that you mount it to prevent stray light from disturbing your video experience.
The green LED is continuously illuminated when power is On, but it flickers when receiving signals from the remote control.
When mounted (upside down) in the Profile 65” and the Profile 65” Dual, the LED is not visible.
Snap it on gently.
Power Camera
Supply Control
Extra Camera
Out and for Daisy
Chaining*
HDMI and HD-SDI*
•HDMI is the main video source. The maximum resolution is 1080p60.
•
•The HDMI and
Kensington lock
HDMI | Ethernet |
Video Out | RJ45 |
|
Extra camera*
If you want to connect cameras in a daisy chain:
•The first camera in the chain is powered by the camera control cable. The next must use the 12V DC Power in.
•Use an extra camera cable between the Extra Camera sockets.
Ethernet
Camera control
Camera control is used for controlling the pan, tilt and zoom, and for powering up the camera.
For software upgrades on daisy chained cameras. Requires software version TC3.0 or higher on the Codec 
http://www.tandberg.com/docs
Power
•When the camera is used with a TANDBERG Codec, power will be supplied through Camera Control cable.
•When the camera is used with
Kensington lock
The Kensington lock may be used to prevent the camera to be moved from its place or to prevent theft.
* Not supported with Codec C20
7 | www.tandberg.com |
