Tandberg Data 1080P manual Daisy chaining of the PrecisionHD 1080p 12X/4X

TANDBERG PrecisionHD 1080p/720p camera Camera User Guide

Contentsontents

IntroductionIntroduction

PhysicalPhysicaliinterfacet rf

Cablesables

ConnectiConnect toto codec

Videoideo forformatsats

DaisyDaisyai chaininghainiiningg

Appendicesppendices

Contactontact usus

Daisy chaining of the PrecisionHD 1080p 12X/4X

A single daisy chain with PrecisionHD 1080p

12X can have:

•Three cameras when using Codec C60.

•Seven cameras when using Codec C90.

The PrecisionHD 1080p 4X has daisy chain support, but can only be in the end of a chain.

Locate the Extra Camera and Power connectors.

• Power. The first camera in the chain is

powered up from the codec by the VISCA

camera control cable. Additional cameras

must use the 12V DC Power in.

Example. TANDBERG PrecisionHD 1080p 12X/4X cameras in daisy chain.

	Power in
	12V DC
Main	Second
camera	camera

RJ11–RJ45

RJ11–RJ45

Power in 12V DC

Third

camera

RJ11–RJ45

You can connect up to three cameras with Codec C60 and up to seven cameras with Codec C90

• Extra camera cable. The daisy chained

cameras are connected by using the VISCA

Extra Camera cable (maximum length 20 m

/ 65.6 ft) between the Extra Camera In and

Codec Control In sockets.

• HDMI and HD-SDI. The HDMI and HD-SDI

outputs can be used simultaneously on the

same camera.

Connect to the	HDMI out:
Camera Control	Connect to the
socket on the	Video Input 1
codec.	on the codec

HDMI out:	HDMI out:
Connect to the	Connect to the
Video Input 2	Video Input 3
on the codec	on the codec

VISCA™ is a trademark of Sony Corporation

D14640.01—MARCH 2010 17 www.tandberg.com