TANDBERG PrecisionHD 1080p/720p camera | Camera User Guide |
Contentsontents
IntroductionIntroduction
PhysicalPhysicaliinterfacet rf
Cablesables
ConnectiConnect toto codec
Videoideo forformatsats
Daisyaisy chainingchaining
AppendicesApp dicesices
Contactontact usus
The VISCA™/RS–232 control
protocol, cont...
Video mode selection
The DIP switch selection has priority over the selection made by the CAM_Video_Format command. If the DIP switch is set to auto, the CAM_Video_Format setting will be used. If both are set to auto, resolution will be controlled automatically by EDID.
DIP Switch
Switches are numbered 1 to 5. The VISCA column shows the value that must be used when using the CAM_Video_Format command.
NOTE: The DIP switches are only read by the SW at startup/boot. So if the DIP switches are changed the camera must be rebooted.
If an undefined mode is selected, the output will default to auto.
1 | 2 | 3 | 4 | 5 | Visca | HDMI |
|
0 | 0 | 0 | 0 | 0 | x | Auto* |
|
0 | 0 | 0 | 0 | 1 | 0x0000 | 1080p25 | 1080p25 |
0 | 0 | 0 | 1 | 0 | 0x0001 | 1080p30 | 1080p30 |
0 | 0 | 0 | 1 | 1 | 0x0002 | 1080p50 | 720p50 |
0 | 0 | 1 | 0 | 0 | 0x0003 | 1080p60 | 720p60 |
0 | 0 | 1 | 0 | 1 | 0x0004 | 720p25 | 720p25 |
0 | 0 | 1 | 1 | 0 | 0x0005 | 720p30 | 720p30 |
0 | 0 | 1 | 1 | 1 | 0x0006 | 720p50 | 720p50 |
0 | 1 | 0 | 0 | 0 | 0x0007 | 720p60 | 720p60 |
0 | 1 | 0 | 0 | 1 | 0x0009 | SW control |
|
*Camera negotiates format over HDMI,
in absence of HDMI sync.
1
0
The DIP switch
27 | www.tandberg.com |
