Table of Contents
1. Overview and Features of the
Tandberg DLT4000 Drive 1-1
1.1. In This Chapter 1
1.2. Product Overview 1
1.3. Fast Data Transfer Rate 2
1.4. High-Capacity and Compatibility 2
1.5. Compaction 3
1.6. Durable Media 3
1.7. Compatibility 3
1.8. Firmware Update Capability 3
1.9. Embedded Diagnostics 4
2. Installing and Configuring the
Tandberg DLT4000 Drive 2-1
2.1. In This Chapter 1
2.2. Prepare for the Installation 1
2.2.1. Before You Start 1
2.2.2. Installation Setup 2
2.2.3. Site Setup 2
2.2.4. Site Guidelines 2
2.3. Install the Drive 4
2.4. Configure the Tandberg DLT4000
Tabletop 5
2.4.1. Configuration Guidelines 5
2.4.2. Disable Parity Checking 5
2.4.3. Changing the SCSI ID 5
2.5. Connect the Cables 7
2.5.1. Examine the Tandberg
DLT4000 Rear Panel 7
2.5.2. Connect the SCSI Signal Cable 8
2.5.3. Terminate the SCSI Bus 8
2.5.4. Selecting the Correct AC Power
Cord 9
2.5.5. Connect the Power Cord 10
2.6. Test the Installation 11
2.6.1. Run POST 11
2.6.2. What to Do after POST 12
2.7. Tandberg DLT4000 Troubleshooting
Chart 13