Tanita PD640 EN Usage 7. Listening to the radio, Tuning to a radio station, Adjust volume

Models: PD640

1 60
Download 60 pages 31.34 Kb
Page 7
Image 7
EN

EN

Usage 7. Listening to the radio

[1] Listening to the radio

1. Inserting the earphone into the jack in the body switches the radio on.

2. Put the earphone in your ear.

Turn the Volume dial in the Up direction to hear the radio.

The Radio indicator [ [1] Listening to the radio2. Put the earphone in your ear.[2] Tuning to a radio station[3] Adjust volumeTurn the Volume dial to adjust the volume.[4] Turn off the radio powerPull the earphone out of the jack in the body.Turn the volume dial to the Off position.Manual background ] and the Battery mark

[ Manual background ] appears.

Notice

After one hour, the radio switches automatically to energy-saving, becoming inaudible. The Radio

indicator [ Manual background ] starts flashing. To go on listening to the radio, press the Mode button.

Caution

If your ear is abnormally affected by the earphone, immediately stop using it and consult a doctor.

[2] Tuning to a radio station

Press the Scan button to tune the radio to the station you want.

Notice

The available radio frequency range is 88 - 108MHz.

Station does not display on unit.

Press the RESET button to return the radio frequency to the beginning.

Reception may vary due to the region, the surrounding environment, time of day and other factors.

[3] Adjust volume

Turn the Volume dial to adjust the volume.

Caution

• Do not listen for long periods at volume levels that strain the ears, as such listening can permanently impair your hearing.

[4] Turn off the radio power

Pull the earphone out of the jack in the body.

Turn the volume dial to the Off position.

Notice

• Unplug the earphone when you are not using the radio. The battery will run down if the earphone is left plugged in.

7

Page 7
Image 7
Tanita PD640 EN Usage 7. Listening to the radio, Tuning to a radio station, Adjust volume, Turn off the radio power