Tascam 424MKIII owner manual Effect 2 SEND/TAPE CUE OUT, High, Normal

EFFECT 2 SEND/TAPE CUE OUT
(1/4" phone jack)
Output Impedance:	100 ohms
Nominal Output Level:	–10 dBV (0.3 V)
Minimum Load Impedance:	2k ohms
TAPE OUTPUT (RCA jack x 4)
Output Impedance:	100 ohms
Nominal Output Level:	–10 dBV (0.3 V)
Minimum Load Impedance:	2k ohms
MONITOR OUTPUT (RCA jack x 2)
Output Impedance:	690 ohms
Nominal Output Level:	–10 dBV (0.3 V)
PHONES (1/4" stereo phone jack x 1)
Nominal Load Impedance:	30 ohms
Maximum Output Level:	60 mW (approx.)
Equalizer
HIGH (Shelving):	10 kHz, ±10 dB
MID (Parametric):	250 Hz to 5 kHz, ±12 dB
LOW (Shelving):	100 Hz, ±10 dB
Frequency Response:
MIC INPUT to LINE OUTPUT:	20 Hz to 20 kHz ±3 dB
LINE INPUT to LINE OUTPUT:	20 Hz to 20 kHz ±2 dB
LINE INPUT to EFFECT OUTPUT:	20 Hz to 20 kHz ±2 dB
LINE INPUT to PHONES:	40 Hz to 20 kHz ±3 dB
Signal-to-Noise Ratio
(20 Hz to 20 kHz, B.P.F. inserted)
1 MIC INPUT to LINE OUTPUT	65 dB (at a nominal input level of –60 dBV)
4 MIC INPUTS to LINE OUTPUT	60 dB (at a nominal input level of –60 dBV)
1 LINE INPUT to LINE OUTPUT	76 dB (at a nominal input level of –10 dBV)
4 LINE INPUTS to LINE OUTPUT	70 dB (at a nominal input level of –10 dBV)
Distortion
1 MIC INPUT to LINE OUTPUT	0.05% (at 1 kHz, 15 dB above nominal input level with
	30 kHz low-pass filter inserted)
1 LINE INPUT to LINE OUTPUT	0.04% (at 1 kHz, nominal input level with 30 kHz low-pass
	filter inserted)
Crosstalk:	55 dB (at 1 kHz, nominal input level with 30 kHz low-pass
	filter inserted)
Recorder Section
Record/Play channels:	4/4
Noise Reduction:	dbx TYPE II
Frequency Response (overall):	40 Hz to 16 kHz, ±3 dB at 9.5 cm/sec.,
	40 Hz to 10 kHz, ±3 dB at 4.8 cm/sec.
Signal-to-Noise Ratio (overall):	UNWTD (20 Hz to 20 kHz)/IHF A WTD
HIGH:	55 dB/58 dB (without dbx); 90/95 dB (with dbx)
NORMAL:	54 dB/56 dB (without dbx); 88/93 dB (with dbx)
Total Harmonic Distortion:	1.0% (1 kHz)
Crosstalk (Channel Separation):	55 dB or better
Erasure:	65 dB or better (at 1 kHz, B.P.F. inserted)

51