BASIC OPERATIONS
Playing a Specific Tune from the Beginning (SINGLE play)
The following describes the procedure for playing the final take (online playback) after selecting and confirming a desired tune (monitor playback). The following description assumes that the procedure is performed with menu items at their default settings.
1 Select the single mode using the PLAY MODE key.
Display of playback position
During playback, the approximate playback position in the track is displayed on the character display area of the display window in the form of a
Press the PLAY MODE key several times until “SINGLE” is lit in the playback mode display area of the display window.
2Press the PLAY/PAUSE key to enter the monitor PAUSE mode. The PLAY/PAUSE key starts blinking.
3Select the tune (track) to play back using the TRACK key.
The monitor PAUSE mode is enabled at the start of the selected track.
4To check the playback sound, press the PLAY/PAUSE key to perform monitor playback.
z In addition to using an external monitor system, the monitor playback sound can also be checked on headphones connected to the PHONES terminal on the CD player.
5After checking the monitor playback sound, press the READY key.
The disc returns to the tune start point, and the CD player enters the online READY mode. (The READY key is lit.)
6Press the ON LINE key to start online playback. When the tune ends, playback automatically stops. z To cancel playback, press the STOP key.
[NOTE]
•In the default setting, the failsafe function is ON, and operation of keys other than STOP, PLAY MODE and DISP MODE is not accepted during online playback. However, the menu system can be used to set the failsafe function OFF. (→ page 23 “Failsafe Function”)
When the time display in the display window is the track remaining mode (REMAIN), all of the square dots light at the beginning of the track, and decrease as playback progresses.
TASCAM