MENU OPERATIONS

Menu Operation Basics

The MENU, ENTER and +/- keys are used for performing menu operations.

1Press the MENU key.

The CD player enters the menu mode, and the menu screen is displayed in the display window.

The following are displayed in each menu screen.

Menu No. Menu item name Current setting value

Details display

2Press the +/- key to select the desired menu item.

Pressing the + key displays the menu item for the next menu No.

Pressing the - key displays the menu item for the previous menu No.

z At this state, the menu No. blinks to indicate that the menu item is currently selected.

z The menu details display is scrolled immediately after the screen is switched, and then the leading 12 characters are displayed fixed in the display window. Not only item details but also selections are displayed depending on the menu item (e.g. menu No. 19).

3Press the ENTER key to apply the selected menu item. The menu No. stops blinking and stays lit.

z The following steps (4 to 6) are not applied to menu No. 05 (“PROG”), menu No. 21 (“A_CLR”) and the total motor time display.

4Press the +/- key to select the desired value.

The current setting value blinks when it is changed.

5Press the ENTER key to apply the newly set value.

The value stops blinking and stays lit. When the new settings are fixed, the menu mode automatically ends.

[NOTE]

The alphabet characters of the menu item names are displayed as follows:

When the Remote Control Unit RC-601MKII (sold separately) is connected and menu operations are being performed using the RC-601MKII, all CD player operations including menu operations are not accepted.

Likewise, when menu operations are being performed on the CD player, all RC-601MKII operations including menu operations are not accepted.

18 TASCAM CD-601MKII