
Safety Information
This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings.
The label required in this regulation is shown .
CAUTION
•DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER.
•USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
•IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE.
Optical pickup:
Type: | |
Manufacturer: | SONY Corporation |
Laser output: | Less than 0.4 mW on the |
| objective lens |
Wavelength: | 760 to 800 nm |
The
NOTE
•Leave 1U of space above the unit for ventilation.
•Allow at least 10 cm (4 in) at the rear of the unit for ventilation.
4 TASCAM