Tascam CD-601MKII MENU OPERATIONS, Menu Configuration

MENU OPERATIONS

Various settings on the CD player can be made using the menu system.

Menu Configuration

The menu contains the following items.

Menu	Item Display	Details Display	Description	Reference Item
No.
01	A_CUE	Auto cue level	Auto cue level setting	“Setting the Auto Cue Level”	(p. 21)
02	ONLINE	Online play output	Setting the terminals for online	“Setting the Terminals for Online	(p. 22)
			output	Output”
03	MONI	Monitor output	Setting the terminals for monitor	“Setting the Terminals for Monitor	(p. 22)
			output	Output”
04	CLOCK	Clock source	Operation clock setting	“Referencing to an External Clock	(p. 23)
				Source”
05	PROG	Program setting	Program setting	“Program Playback”	(p. 20)
06	INCR_P	Incremental play	Incremental play ON/OFF	“Incremental Play Function”	(p. 21)
07	TIMER	Timer play	Timer play ON/OFF	“Timer Play Function”	(p. 24)
08	OUTPUT	Output stereo mono	Output stereo/monaural setting	“Setting Stereo/Monaural”	(p. 22)
09	OUT_L	Output level	Output level setting	“Setting the Output Level”	(p. 22)
10	F_SAFE	Fail safe	Failsafe function ON/OFF	“Failsafe Function”	(p. 23)
			during online playback/READY
11	EOM	End of message time	End of track warning display	“Displaying the End of Track
			setting	Warning”	(p. 23)
12(*)	E_CHK	End check time	End check time setting	RC-601MKII Owner’s Manual
13(*)	BANK	Memory BANK select	Memory back selection	RC-601MKII Owner’s Manual
14	F_STAR	Fader start polarity	Setting fader start polarity	“Setting fader start/stop”	(p. 25)
15	F_STOP	Fader stop state	Setting the state of the CD	“Setting fader start/stop”	(p. 25)
			player at a fader stop
16	CUE_UP	Auto CUE up state	Setting the CD player standby	“Auto Ready Function”	(p. 21)
			mode during an auto cue or an
			auto ready
17(*)	RMT	Remote control	CD player operation enable/	RC-601MKII Owner’s Manual
			disable setting when remote
			control (*) RC-601MKII is used
18	FRAME	Frame display	Setting the frame display of the	“Clearing the Frame Display”	(p. 24)
			time display area of the display
			window
19	TIME	Time display	S e t t i n g t h e t i m e d i s p l a y	“Switching the Time Display”	(p. 23)
			switching pattern
20	CUESET	Cue point set	Cue point setting	“Auto-registering Cue Points”	(p. 14)
21	A_CLR	Memory ALL clear	Memory all clear	“Clearing Menu Settings”	(p. 19)
22	USER	User setting	Calling up user banks to save	“Saving Menu Settings”	(p. 19)
			settings to
23	RS232C	Com PORT baud rate	RS-232C baud rate setting	“Setting the baud rate”	(p. 26)
(none)	xxxxH	Motor addition time	Motor total drive time display	“Viewing the Total Motor Time”	(p. 24)
		display

*Menu items followed by an asterisk (*) in the above table are valid when the Remote Control Unit RC-601MKII (sold separately) is connected.

For details on these menu items, refer to the RC-601MKII Owner’s Manual.

TASCAM CD-601MKII 17