PLAYBACK-RELATED FUNCTIONS
Program Playback
The program playback function can be used to play back a disc in any desired track order. Up to 30 tracks can be programmed.
Entering the program mode
Select the program mode using the PLAY MODE key.
Press the PLAY MODE key for the required number of times until “PROGRAM” is displayed in the message display area of the display window.
In the program mode, the disc is played backed according to the program made by the method described as follows.
Programming
1Press the MENU key to enter the menu mode.
2Press the +/- key, select menu No. 05 (“PROG”), and press the ENTER key.
The display window changes to the program setup screen.
3Select the desired track using the TRACK key, and press the ENTER key.
The selected track is set as the 1st tune (program No.
01)of the program, and the next tune (program No. 02) can be set.
Adding program tunes
You can add a program tune by performing the following procedure while the program setup screen is displayed.
1Press the SEARCH key, and select the location to add a tune.
For example, to add a new tune between the tunes currently preset to program Nos. 2 and 3, select program No. 3.
2Press the + key.
3Select the track to add to using the TRACK key, and press the ENTER key.
4When you have finished adding tunes, press the MENU key to exit the menu mode.
Deleting program tunes
You can delete a program tune by performing the following procedure while the program setup screen is displayed.
1Press the SEARCH key, and select the program number that is preset with the tune to delete.
2Press the - key.
This deletes the tune, and the program numbers of the following tunes are rounded up.
3When you have finished deleting tunes, press the MENU key to exit the menu mode.
Clearing a program
Opening the disc tray clears the program.
[NOTE]
•The program settings are not cleared even if the CD player is turned OFF with a disc loaded.
4Repeat step 3 above for the required number of times to make the desired program.
5When you have finished making the program, press the MENU key to exit the menu mode.
Swapping programmed tracks
You can swap programmed tracks by performing the following procedure while the program setup screen is displayed.
1Press the SEARCH key to select the program No. that you want to swap.
2Select the desired track using the TRACK key, and press the ENTER key.
3When you have finished swapping the track, press the MENU key to exit the menu mode.
Auto Cue Function
When the auto cue function is turned ON, the CD player automatically stands by (in the online READY or monitor PAUSE mode) at the audio start point of the track when the track is selected or when the auto ready function is ON. (→ page 16 “Selecting the Track”)
Press the AUTO CUE key to turn the auto cue function ON/ OFF. When the auto cue function is ON, “A.CUE” is lit in the display window.
zThe auto cue function ON/OFF setting is backed up on the CD player. So, the same setting is reproduced when the CD player is next turned ON.
After searching for the audio start point on the track with the auto cue function ON, whether the CD player enters the online READY mode or the monitor PAUSE mode is determined according to the auto cue up setting described below.
20 TASCAM