6 – Basic Operations–Punch-in and punch-out
TASCAM DA-98HR 39
6.6.9 Reviewing the punched material
1To replay the punch-in, press the PLAY key.
Playback start (the REC FUNCTION indicators
of the armed tracks will continue to flash).
2At the post-roll point, the tape autom atically
rewinds to the pre-roll point.
3If you want to record the punch-in again, press
the AUTO PUNCH key M so that the indicator
flashes, and repeat the process described
above.
4If you are satisfied with the punch-in, follow
the steps below, otherwise, press LOC 1 to
return to the punch-in point, press the AUTO
PUNCH key so that the indicator flashes, and
repeat the take.
6.6.10 Exiting punch-in mode
1Disarm any armed tracks (press the REC
FUNCTION keys so that the indicators go out).
2Press the CLEAR key G to exit the AUTO
PUNCH (or rehearsal) mode.
The punch points are still retained in memory.
3You can press the AUTO MON key so that the
indicator goes out and normal monitoring
modes are now in effect (5, “Monitoring
modes”). However, leaving the unit in AUTO
MONITOR mode may be more useful while
recording.