2–Preparation

Inserting the SD card

An SD card is used as recording media for recording and playback.

•• Cards that comply with SD and SDHC standards can be used.

•• A list of SD cards that have been tested with this unit can be found on the TASCAM web site (www.tascam.com).

The SD card slot and the USB connector are under the cover on the left side of the unit. The SD card is to be inserted in here.

If you try to force the SD card in the wrong way, the slot and the card could be damaged, so please use caution.

NOTE

An SD card is pre-installed when the unit is new. There is no need to reset this SD card before using it to record or play files.

1.Press the cover down in the direction of the arrow to open it.

2.Insert the SD card in the SD card slot and push it until it clicks fully into place.

3.Close the cover after inserting the card.

14TASCAM DR-07