show the current setting value (the factory setting is “X8”) highlighted in inverse.
4Turn the wheel to select the desired setting. The setting is changed immediately, so there is no need to press the ¥/π key again to confirm it.
5Press STOP/HOME to return to the Home
Screen.
NOTE
•When the ¶ icon appears in the lower right part of the screen, as shown in the preceding image, there is additional information for the current screen below what is shown on the display.
•When the § icon appears, there is additional information for the current screen above what is shown on the display.
•You can also use the ≤ key instead of the ¥/π key in these steps.
•When the § icon appears to the right of a setting value, you can change that value by turning the wheel to the right. When the ¶ icon appears to the right of a setting value, you can change that value by turning the wheel to the left.
38TASCAM