8–Recording

MIC

Sets the input source as the built-in microphone when no microphone cable is connected to the MIC IN jack (stereo mini-jack). When a microphone cable is connected to the MIC IN jack, the input microphone signal becomes the input source.

If you select MIC, you should also set the

input functions. (See “Setting the MIC input func- tions” below.)

LINE

Sets the source as the line level signal input to the right side panel LINE IN jack (stereo mini-jack).

CAUTION

Use headphones to monitor when you are recording with a microphone. If you use speakers to monitor, the sound output from the speakers may also be recorded, causing a poor recording and even feedback.

NOTE

The input source is the recording source when recording.

Setting the MIC input functions

After selecting MIC as the INPUT item, press the

µkey to highlight INPUT, then turn the wheel right to open the MIC Input Setting screen.

This screen has the following settings. Among these, POWER, is only effective to MIC IN. All the

50TASCAM DR-07