8–Recording

MID or HIGH. (See “Setting the MIC input func- tions” on page 50.)

TIP

•In addition to adjusting the REC LEVEL volume, try changing the distance and angle between the microphone and the sound source.

•To record the sound of a source most effec- tively and accurately, point the front of the DR-07’s built-in mics toward the sound source with the LCD facing up.

•An easy way to set the input level is to raise

it until the PEAK indicator lights while inputting as loud a noise as you expect to

record. When the PEAK indicator lights, lower the input level until it no longer lights.

NOTE

Press STOP/HOME to end recording standby.

Recording

Before starting the following operation procedures, input selection and level adjustment should be completed, and the Home Screen should be open.

1 Press RECORD to begin recording standby.

The screen shows the recording file name, the input source, the recording audio file type and sampling frequency. Please confirm that these are as desired before starting recording.

54TASCAM DR-07