5 − Using with a Computer (M-164UF)

When installing the driver, start with the M-164UF mixer disconnected.

CAUTION

•• Handle the enclosed CD-ROM with care. If the disc becomes scratched or dirty, your computer may be unable to read it and you may be unable to install the software.

If the disc becomes unreadable, you can request a replacement disc for a fee.

•• Do not try to play the included CD-ROM disc on an ordinary audio CD player. The noise produced could damage the speakers or harm your hearing.

Installing the drivers for Windows

The US-1641’s drivers are provided on the CD-ROM as an executable installer.

You can also download the latest version of the driver from the TASCAM website (www.tascam.com).

If the driver on the included CD-ROM is an older version, we recommend that you download the latest version and install it

Installation procedures

The following are detailed explanations (for a Windows XP system) of how to install the driver from the included CD-ROM and how to update the firmware.

CAUTION

When installing the driver, it is necessary to disconnect and reconnect the USB cable during steps 7, 8 and 9. During this time, complete the procedures indicated on the screen within about a minute. Failure to complete the procedures quickly could result in the installation failing.

Installing the drivers

1Make sure that the unit (M-164) is not connected to your computer via a USB cable.

2Insert the included driver installation CD-ROM into the CD-ROM drive on your computer.

3Click the Install M-164 Driver button when the menu screen below appears.

If the menu screen does not appear, find and open the “M-164UF_Install.exe” file on the driver.

4When the language selection screen appears after a short time, use the up and down arrow keys to select the desired language and then click the “OK” but- ton.

55When the screen below appears, click the

Install the driver button.

TASCAM M-164/M-164FX/M-164UF 27