Tascam M-164, M-164FX, M-164UF 28

5 − Using with a Computer (M-164UF)

6Read the contents of the License Agreement, then select I accept the agreement if you agree to the terms. Click the Install button to start installation.

7When the following screen appears, use the includ- ed USB cable to connect the mixer (M-164UF) with the computer.

8When the following screen appears, disconnect the USB cable from the mixer (M-164UF) or the com- puter for a moment.

9When the following screen appears, reconnect the mixer (M-164UF) and the computer with the USB cable.

10When the following screen appears, installation has completed.

Click the Reboot now button to restart the comput- er.

11After the computer restarts, click TASCAM M-164UF(Start > Settings > Control Panels) to launch the M-164UF Control Panel. If information about the driver version, device and other details appear, installation has been successful.

Installation of Mac OS X drivers

1Confirm that the M-164UF and computer are not connected.

2Double-click the M-164UF_Drivers.mpkgon the included CD-ROM to launch the installer software.

3Follow the instructions shown on screen to proceed with the installation.

4After the computer restarts, connect the mixer.

28 TASCAM M-164/M-164FX/M-164UF

Contents

Page WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Page 1 − Introduction 3 − Preparation for Use 4 − Using the mixer 5 − Using with a Computer (M-164UF) Main features Included items About this manual Trademarks Precautions and notes for placement and use Cleaning the unit Top panel Page Page Rear panel Page Connecting the power Page Connection example 2: Using an M-164UFfor recording in a home studio Making stereo output connections Connecting headphones Making input sound source connections Connecting mics Setting the internal effects return channels (M-164FXand M-164UF) Turning the power on and putting the mixer in standby Before turning the power on Turning on the power Putting the mixer in standby Adjusting levels Using the mixer channel functions High-passfilter (HPF) AUX sends Pan And Balance Bus assignments Monitoring with headphones Using AUX 1 for a monitoring mix Using sub-groupfunctions Using the internal effects (M-164FXand M-164UF) Using external effects Using a record player Making final adjustments to the main output sound Functions Installation System requirements Installing the drivers Installing the drivers for Windows Installation procedures Installing the drivers Make sure that the unit not Page How to update the firmware Computer settings Control panel settings Overview Driver settings Connecting by USB Using Cubase LE4 to record Related to mixer settings Related to recording with Cubase LE4 (M-164UFONLY) Ratings Inputs Outputs Performance Other Dimensional drawing Block diagram Level diagram