27
Models 750, 751, 754, 774, 791, 794 Operating Procedures
Figure 25
Step 4
Place the power switch in the ON position.
Figure 26
Step 5
Press the WASH key. This will cause the sanitizing
solution in the freezing cylinder to agitate. Allow it to
agitate for five minutes.
Figure 27
Step 6
Place an empty pail beneath the door spout and raise
the prime plug.
Figure 28
Step 7
Whena stead y stream of sanitizing solution is flowing
from the prime plug opening in the bottom of t he
freezer door, lower the draw handle. Draw off all the
sanitizing solution.
Figure 29
Note: On the Models 754, 774, 791, and 794,
momentarily pull the center draw handle down to
sanitize the center door spout.
Step 8
Once the sanitizer stops flowing from the door spout,
raise the draw handle and press the WASH key,
cancelling the beater motor operation.
Note: You have just sanitized the freezer. Be sure
your hands are sanitized before continuing these
instructions.