35
Model 811, 813, 819, 821 Series Operating Procedures
IMPORTANT!
DO NOT use a jet of water to clean or rinse
the grill.
DO NOT use cold water or ice to cool the
upper platen or the lower cook surface.
Failure to follow these instructions may result in:
Sserious electrical shock
Sburns from hot steam
Sliquid collecting inside the grill and
destroying electrical components
Sdamaged cook surfaces
Step 40
Carefully pour warm water on the lower grill surface,
starting from the back to the front. Use the squeegee
to remove the cleaner from the grill surface.
Figure 64
To avoid damaging the grill:
SNever use grill screens on the upper platen
or the lower grill surface.
SNever use any abrasives or cleaners other
than the approved cleaner.
SNever allow the grill scraper or the abrasive
cleaning materials to come in contact with
the release sheet.
Step 41
Pour a small amount of lukewarm water on a clean,
sanitizer-soaked grill cloth, while holding it over the
lower grill surface. Wipe the lower grill surface until
all residue is removed.
Figure 65
IMPORTANT! Step 42 must be performed
using the grill cleaning pad and holder identified
on page 15 ONLY. Using any other pad and holder
will damage the release sheet.
Note: Contact your local Taylor Distributor to
purchase the correct grill cleaning pad and holder.
(See page 15.)