9
1 - Line Input
Input for line instruments such as keyboards etc.
Connection type: 1/4” jack.
2 - Instrument Input
Input for:
- Guitar pedal or preamp
- Active pickups (guitar with batteries)
- Acoustic guitar with preamp
- Keyboard output
Connection type: 1/4” jack.
3/4 - Balanced Outputs
Balanced outputs on 1/4” TRS jack. These outputs may
be connected directly to balanced mic inputs with
1/4”TRS to XLR adapters.
WARNING!When connecting the G-Natural
outputs to microphone inputs on a mixing console,
the phantom power for these channels MUST be
switched off! Otherwise you may damage the
G-Natural circuits.
REAR PANEL VIEW
UL60065
EN/IEC 60065
CSA file no:
LR 108093
MICPASSTHRU
SERIALNO.
TYPE:TFW001
MADEINTHAILAND
IN
THRU
IN
LINE LEFT RIGHT OUT
MIDIBALANCEDINPUTS BALANCEDOUTPUTS DIGITALI/O PEDAL
DI
DO
S/PDIF
100-240V~AC
50-60Hz,15W
R
CUS
THISCLASSB DIGITALDEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-
CAUSINGEQUIPMENTREGULATIONSAND COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATIONSUBJECTTOCONDITIONS STATED IN THE MANUAL.
WARNING
TOREDUCETHE RISK OF FIRE OR ELECTRIC
SHOCKDONOT EXPOSE THIS EQUIPMENT TO
RAINORMOISTURE
AVIS:
RISQUEDECHOCELECTRIQUE-NE PAS
OUVRIR.
CAUTION
RISKOFELECTRICSHOCK
DONOTOPEN
MICINPUT
MIC LEVEL
MIC IN
SELECT
-20dB LIMITER+48V
INSTRUMENT
5 - Digital I/O - S/PDIF
Sends and receives digital audio to S/PDIF standards on
standard RCAconnectors.
6 / 7 / 8 - MIDI In / Thru / Out
Standard MIDI interface.
9 - Pedal In
Several types of external pedals can be connected and
used to control parameters.
- Connect an expression or a volume pedal to control
e.g. volume
For perfect response when using an expression or a
volume pedal, the pedal must be calibrated. This is
done via the pedal menu
- Via the pedal menu you can set up what parameter
the expression/volume pedal should control