TC electronic SDN BHD G-Natural Mic Pass Thru, Mic Input, Mic Level knob, 13 -20 dB button, Power

REAR PANEL VIEW

10 - Mic Pass Thru

This connects directly to the microphone input and is used to connect directly to a mixing console. When connecting microphones that require phantom power, you have the option of using the phantom power from either G-Natural or the mixing console.

WARNING! Please note that using phantom power from both the mixing console and G-Natural simultaneously will result in too much power and possible damage to the microphone.

11 - Mic Input

Balanced microphone input.

12 - Mic Level knob

Controls the input gain of the mic input.

13 - -20 dB button

Press to attenuate the mic input by 20 dB to handle e.g. high output condenser microphones.

14 - Mic In Select button

This switch enables the mic input. When not pressed (out position), G-Natural defaults to the line input.

15 - Limiter button

This enables the VOS™ optical limiter on the mic input.

16 - +48V button

This enables +48V phantom power on the mic input.

WARNING! Never plug single ended (unbalanced) microphones or instruments or signal processors (balanced or unbalanced) into the mic input if +48V phantom power is on.

17 - Power In

The switchmode power-supply accepts from 100 to 240VAC.

10