TC electronic SDN BHD G-Natural user manual Master, Calibrating

MENU - PEDAL

Master

If an expression pedal is connected to the pedal input and a preset is recalled, G-Natural can be set up to respond to either the current position of an expression pedal or to the value stored with the preset.

Preset: The parameter value stored as part of the preset applies – regardless of the current position of the expression pedal.

Pedal: The position of the expression pedal is identified at the moment of preset change, and the value stored as part of the preset is discarded.

Calibrating

In order to secure the best performance of your expression pedal, G-Natural must be calibrated to this pedal. Follow this step by step guide.

•Make sure that you have connected your pedal to the pedal connector on the rear panel

•Select “Calibrate from the Pedal Menu

	PEDAL MENU
	CALIBRATE	<menu>
• Press MENU
• The LCD now reads
	PEDAL CALIBRATE
	Set Min: 0	<menu>

•Place your pedal in minimum position (“Heel down”) and press MENU

•The LCD now reads

PEDAL CALIBRATE
Set Max:	0	<menu>

•Place your pedal in maximum position (Toe down) and press MENU

•The LCD reads: “CALIBRATION DONE”

PEDAL CALIBRATE

> CALIBRATION DONE <

18