OPERATION

same location. “Normal store” is used if you want to change preset location and maybe the name as well.

Quick store - press and hold STORE for 2 seconds. The preset is now stored at the current location.

If you are trying to store a factory preset using “Quick store”, you will automatically be directed to “Normal store” mode.

Normal Store - press STORE once:

Now the following controls are available:

-Encoder A selects preset location

-Encoder B selects preset name characters

-Encoder C changes characters

-Encoder D selects recall, delete or store mode

When selections are made press STORE to confirm.

8 - Levels

Output levels can be set for each preset. All other parameters in the levels menu are “global” parameters and do not change with presets.

9 - Menu

This menu holds important settings such as MIDI, routing, pedal settings and utility parameters. Please refer to the relevant manual sections for details.

10 - LEDs

The LEDs indicate the selected effect in each block.

11 - Comp

On/off switch for the compressor.

12 - Mod

On/off switch for the modulation block.

11+12

Press both switches at the same time to go up one bank.

13 - Delay

On/off switch for the delay block.

14 - Reverb

On/off switch for the reverb block.

15+16

Press both switches at the same time to go down one bank.

15 - Preset 1

Press to recall preset #1 in the current bank.

16 - Preset 2

Press to recall preset #2 in the current bank.

17 - Preset 3

Press to recall preset #3 in the current bank.

18 - Boost / Tap Tempo / Hold for Tuning

Via the footswitch parameter in the utility menu this switch can be set to act as either boost or tap tempo.

With the “Boost” function selected the entire signal can be boosted up to 10 dB. Max boost level is set via the levels menu. The boost level can be set for individual presets within the set max boost.

With “Tap Tempo” selected, the global tempo can be entered by tapping the switch.

Whether you are using tap tempo mode or boost mode for this switch the tuner mode can be accessed by pressing the switch for 2 seconds. In Tuner mode G-Natural can be set up to mute the outputs for convenient quiet tuning. This is setup in the Utility menu via the Output parameter.

8

Page 10
Image 10
TC electronic SDN BHD G-Natural user manual Levels, Menu, LEDs, Comp, Mod, 11+12, Delay, Reverb, 15+16, Preset