JVC UX-F72MD, UX-F70MD manual Using Daily Timer, How Daily Timer actually works

Continued

English

4 Select the media to be recorded on.

1)Press ¢or 4 repeatedly to select the media.

TO MD TO TAPE

2)Press SET.

•When you select “TO MD,” select the recording length mode from “SP,” “LP2,” or “LP4” by pressing ¢ or 4.

•When you select “TO TAPE,” select the reverse

mode either or by pressing ¢or 4.

3)Press SET again.

5 Set the timer-on and timer-off time.

1)Press ¢or 4repeatedly to select the hour of the timer-on time, then press SET.

To turn off the Recording Timer after its setting is done,

1Press CLOCK/TIMER repeatedly until “REC TIMER” appears on the display.

2Press ¢to select “OFF” in step 2 on page 57. The timer ( ) and REC indicators go off from the display.

To turn on the Recording Timer again, press 4to select “ON” in step 2 above.

The timer ( ) and REC indicators light on the display. The settings you have done are shown on the display for

your confirmation.

Recording Timer will be canceled and the unit will not turn off automatically in the following.

•When you press 7 (while recording.)

•When you turn off the Recording Timer (see above.)

The minute digit of timer-on time starts flashing on the display.

È È

Timer-on time Timer-off time

2)Press ¢or 4 repeatedly to select the minute of the timer-on time, then press SET.

The hour digit of timer-off time starts flashing on the display.

3)Press ¢or 4repeatedly to select the hour of the timer-off time, then press SET.

The minute digit of timer-off time starts flashing on the display.

4)Press ¢or 4 repeatedly to select the minute of the timer-off time, then press SET.

The REC indicator stops flashing and remains lit.

6 Press STANDBY/ON to turn off the unit (on standby) if necessary.

The setting you have done are shown on the display in sequence.

The REC indicator remains lit on the display.

•No sounds come out of the speaker during timer recording is performed.

When you unplug the AC power cord or if a power failure occurs

The clock setting, the tuner preset stations and other settings will be erased.

Using Daily Timer

With Daily Timer, you can wake up to your favorite music or radio program.

•You can set Daily Timer whether the unit is turned on or off (on standby.)

•To correct a mis-entry any time during the setting process, press CANCEL.

How Daily Timer actually works

The unit automatically turns on, and starts playing the specified source when the timer-on time comes. Then, when the timer-off time comes, the unit automatically turns off (on standby).

Daily Timer works every day, and the timer settings remain stored in memory until you reset them or unplug the AC power cord.

On the remote control ONLY:

1 Press CLOCK/TIMER repeatedly until “DAILY TIMER” appears on the display.

The timer ( ) indicator lights, and the DAILY indicator starts flashing on the display.

•Each time you press the button, the timer mode changes as follows:

REC TIMER DAILY TIMER

Clock Time TIME ADJUST

– 58 –