| Continued |
|
|
To check the program contents | Playing at Random — Random Play |
Before playing, you can check the program contents by |
|
| |
| |
pressing ¢ or 4. | The tracks of a loaded CD will play at random. |
• ¢: Shows tracks in the programed order. |
|
• 4: Shows the programed tracks in the reverse order. | On the remote control ONLY: |
English
To modify the program
Before or after playing, you can erase the last programed track by pressing CANCEL. Each time you press the button, the last programed track is erased from the program.
To add tracks in the program before you start play,
press the number buttons to select track numbers you want to add.
To erase the entire program, press CD open/close 0to
eject the CD.
• Turning off the unit will also erase the program.
If you try to program a 33rd step
“MEMORY FULL” will appear on the display.
If your entry is ignored
You have tried to program a track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks.) Such entries are ignored.
If the total playing time is 100 minutes (one hour and 40 minutes) or more
The total playing time will not be shown. (“–
1 Load a CD.
2 Press CD 3/ 8, then 7.
The source is changed to “CD.”
3 Press PLAY MODE repeatedly until “RANDOM” appears on the display.
•Each time you press the button, play mode changes as follows:
PROGRAM |
| RANDOM |
|
|
| ||
(Program play) |
| (Random play) |
Normal play
4 Press CD 3/ 8.
The tracks are played at random.
CD indicator
The current track
Play mode
Elapsed playing time
Random play stops when all the tracks are played once.
To stop during play, press 7.
To skip the current track, press ¢.
•You cannot go back to the previous tracks by pressing
4.
To exit from Random play mode, press PLAY MODE repeatedly so that the unit enters another playback mode (Normal play or Program play mode) before or after play.