JVC UX-F70MD manual Press MD open/close 0on the main unit, Insert an MD into the MD loading slot

English

Playing Back the Entire MD — Normal Play

You can play an MD.

1 Press MD open/close 0on the main unit.

The unit automatically turns on, the electronic swing panel slides downward, so the MD loading slot appears.

•If an MD is already in the MD loading slot, it will eject.

Insert an MD in the same way as indicated on the MD such as } or 2.

MD loading slot

2 Insert an MD into the MD loading slot.

The MD is pulled in, then the electronic swing panel slides upward automatically.

•When the current source is MD, the information on the loaded MD appears on the display as follows:

Ç

Ç

Total track number, total playing time, and disc title*

*If the loaded MD does not have a disc title, “NO TITLE” will appear.

3 Press MD 3/ 8.

The MD indicator start rotating on the display and MD playback starts from the first track.

The current track

MD indicator

Total group number

Elapsed playing

time

Track title (when the

Recording length mode* track has no title)

MD playback stops automatically after playing all the tracks on the MD.

To stop during play, press 7.

To remove the MD, press MD open/close 0.

•After pulling out the MD, press MD open/close 0again to close the electric swing panel.

While the unit is pulling the MD into the MD loading slot :

• DO NOT press MD open/close 0.

If the MD or track has a title

The title will appear on the display. (If a title is long and cannot be shown at a time, the unit scrolls the title to show the entire title.)

* About recording length mode — MDLP: see page 31

MDs are played back in the same recording length mode as they were recorded. When an MD starts playing, the recording length mode of the currently playing track lights on the display.

SP : Indicates the tracks recorded in standard stereo recording mode.

LP2 : Indicates the tracks recorded in 2 times long-hour stereo recording mode.

LP4 : Indicates the tracks recorded in 4 times long-hour stereo recording mode.

MDLP features a sound compression method called ATRAC3, and enables a 2 times (or 4 times) long-hour stereo recording and playing.

The MDLP logo is marked on the MD recorders and players compatible with MDLP. It is also marked on MDs pre- recorded in ATRAC3 (excluding recordable MDs.)

– 23 –