Press AUX, Start playback on the external equipment | JVC UX-F72MD

Recording the External Equipment

— Sound Synchronized Recording

With this recording method, you can start recording automatically when the source sound comes into this unit through the LINE IN (AUX) jacks.

Sound synchronized Recording will stop automatically if no sound comes into for more than 30 seconds.

You have three methods (MODE 1/5 – 3/5) to record from external equipment onto an MD.

	Recording	Recording	Recording Speed
	mode	length mode	Recording Speed
	mode	length mode
	MODE 1/5	SP	NORMAL SPEED REC

	MODE 2/5	LP2	NORMAL SPEED REC

	MODE 3/5	LP4	NORMAL SPEED REC

As for MODE 4/5 and 5/5, see page 38.

On the main unit ONLY:

1 Insert a recordable MD into the MD loading slot.

• If the MD playback starts, press 7 to stop it.

2 Press AUX.

The source is changed to “AUX.”

3 Press MODE select to select a recording mode (MODE 1/5 – MODE 3/5) you want.

To check the remaining time while recording external equipment onto an MD

On the remote control ONLY:

Press DISPLAY/CHARA.

•Each time you press the button, the recording indications, remaining time, the current track number of the MD, and clock time appear in sequence.

English

Ex.: When recording with MODE 1/5

4 Press REC start.

“AUX Ready” appears on the display.

5 Start playback on the external equipment.

The recording starts automatically when the sound comes into this unit.

To stop recording, press 7.

“UTOCwriting” appears on the display for a while.

To put a track mark manually while recording, press

SET on the remote control at the place you want.

– 34 –

Image 39

JVC UX-F72MD, UX-F70MD manual Press AUX, Start playback on the external equipment, Recording Recording Speed Mode

Contents

UX-F70MD UX-F72MD Page English Front view Class Laser Product Introduction Precautions Contents Front view Location of the ButtonsMain unit Top view Display window Main Unit Remote Control FM antenna Getting StartedUnpacking To connect an outdoor FM antenna To attach spacers Connecting SpeakersAM antenna To connect an outdoor AM antenna For playing the other equipment through this unit Connecting Other EquipmentTo connect speakers To connect another component such as analog audio equipment Putting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display illumination manually, press Main unit Front view Remote controlBasic and Common Operations Main unit Top view Selecting the Sources and Starting Play Turning On the Power Selecting the Sound Modes Adjusting the VolumeTurning On/Off the Key-touch Tone Reinforcing the Bass Sound To set TODAY’S Color Setting the Display IlluminationTo adjust and register the color To select the color pattern Listening to FM and AM Broadcasts To change the FM reception mode Setting the AM Tuner Interval SpacingTuning in a Station Presetting Stations Press SET again Tuning in a Preset StationPress the number buttons to select a preset number On the remote control only Press DISPLAY/CHARA Mark Playing Back a CD Playing Back the Entire CD Normal Play Precautions on CD Playback Program Play Basic CD Operations To check the program contents Playing at Random Random PlayTo modify the program Repeat ALL Repeat ONE Repeating Tracks Repeat Play Mark Playing Back an MD Press MD 3 About recording length mode Mdlp seePress MD open/close 0on the main unit Insert an MD into the MD loading slot Basic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the informations on the display Playing Tracks in a Group Group Play To erase the entire program, press MD open/close 0toPress 4or ¢while pressing MD Group to select a group Searching by Title of the Track MD Title Search Playing Back a Tape Playing Back a Tape To play both sides Reverse Mode Recording on MDs To put a track mark manually while recording an Before You Start Recording on an MDAbout the track marks To avoid erasing important recordings To check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed Recording Recording FM/AM Broadcasts Recording CD CD Synchronized RecordingBefore recording on an MD To check the remaining time while recording tape onto an MD Recording Tape Tape SynchronizedTo record a single track during play or pause To check the remaining time while recording CD onto an MD Recording Recording Speed Mode Press AUXStart playback on the external equipment Recording on Tapes To keep the best recording and playback sound quality To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To protect your recordings Recording Reverse mode Mode 4/5 Mode 5/5Mode 8/15 To check the clock time while recording MD onto a tape Mode 1/2 Mode 2/2Recording MD MD Synchronized Recording Recording the External Equipment Speed Recording CD onto an MD and a Tape CD Synchronized Recording About MD Group Editing MD Groups Classifying the tracks on an MD Using MD Group FunctionsHow to Make Up Groups Guidance MD Group Functions Introducing MD Group Editing Press ¢or 4to select the last track of a new group Press Enter to finish the editing procedureForming a Group Form GR During playback Press ¢or 4to select a track you want to add to a group Adding a Track to a Group Entry GRDividing a Group Divide GR Press SET During playback Joining Two Groups Join GR To join the divided groups, see the Join GR function toTo divide the joined group, see the Divide GR function on Ungrouping Tracks Ungroup On the remote control only Press SETPress Enter to finish the editing procedure Moving a Group Move GR Erasing Tracks in a Group Erase GR Dissolving All Groups Ungr ALL Editing MD Tracks Introducing MD Track Editing Press ¢or 4to select a track you want to divide Press = or +to adjust the dividing point preciselyDividing a Track Divide Joining Two Tracks Join Press ¢or 4to select a track you want to move When the tracks belongs to a groupMoving a Track Move To divide the joined tracks, see the Divide function on Press SET Repeat to select all the tracks you want to erase Erasing Tracks EraseErasing All Tracks ALL Erase Select a track you want to erase Press ¢or Assigning Titles to an MD About the number of characters inputted for an MD Press SET to enter the selected title entry modeAssigning the Disc Title, Track Title and Group Title Insert an MD to edit Press MD Title INPUT/EDIT Changing the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works How Daily Timer actually works Using Daily Timer Daily Timer does not work at all If the unit is kept turned on when the timer-on time comes Using Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance Atrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc Types Hcms High-speed Copy Management System Scms Serial Copy Management System MD/CD Messages Track Protected X4 Speed Cannot Copy LOW Temp Troubleshooting Specifications EN, CH