English
2 Press MD TITLE INPUT/EDIT repeatedly while pressing MD GROUP to select “DIVIDE GR?”
The source changes to “MD.”
•Each time you press MD TITLE INPUT/EDIT while pressing MD GROUP, the group editing mode changes as follows:
GR 1 TITLE? 
FORM GR? 
ENTRY GR?
Canceled
DIVIDE GR?
ERASE GR?
JOIN GR?
UNGR ALL? 
UNGROUP? 
MOVE GR? 
• If you want to stop this editing process, press CANCEL.
3 Press SET.
4 Press ¢or 4to select the track as the dividing point.
•You can select the track using number buttons. In this case, the selected track starts playback repeatedly.
•The track selected in this step will be the first track in the divided group.
•You cannot select the first track in a group as the dividing point.
•During playback:
The selected track starts playback repeatedly.
5 Press SET.
“<DIVIDE GR>” appears on the display.
• To cancel the setting, press CANCEL, then repeat step4.
6 Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the display while the editing you have made is being recorded on the MD.
To join the divided groups, see the JOIN GR function to
the right.
Joining Two Groups — JOIN GR
This function allows you to join two adjacent groups into a single group.
When the groups have each title, the title of the preceding group is reassigned to the joined group.
Once two groups are joined, the other groups are renumbered.
•To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1 Insert an MD to edit.
2 Press MD TITLE INPUT/EDIT repeatedly while pressing MD GROUP to select “JOIN GR?”
The source changes to “MD.”
•Each time you press MD TITLE INPUT/EDIT while pressing MD GROUP, the group editing mode
changes as follows:
GR 1 TITLE? 
FORM GR? 
ENTRY GR?
Canceled
DIVIDE GR?
ERASE GR?
JOIN GR?
UNGR ALL? 
UNGROUP? 
MOVE GR? 
• If you want to stop this editing process, press CANCEL.
3 Press SET.
4 Press ¢or 4to select the two adjacent groups to be joined.
•During playback:
The tracks in the selected group are played back repeatedly.
5 Press SET.
“<JOIN GR>” appears on the display.
•You cannot join two groups if ungrouped track is in between the two groups. “CANNOT JOIN” appears on the display.
•To cancel the setting, press CANCEL, then repeat step4.
6 Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the display while the editing you have made is being recorded on the MD.
To divide the joined group, see the DIVIDE GR function on page 44.
