English
To stop during play, press 7.
The following informations appear.
CD indicator
Total track number
Total playing time
To remove the disc, press CD open/close 0.
Basic CD Operations
While playing a CD, you can do the following operations.
To stop playback for a moment
Press CD 3/ 8.
The elapsed playing time starts flashing on the display. To resume playback, press CD 3/ 8 again.
To locate a particular point in a track during play
Press and hold ¢or 4.
•¢ :
•4 :
To go to another track
Press ¢or 4repeatedly.
•¢ : Skips to the beginning of the next or succeeding tracks.
•4 : Goes back to the beginning of the current or previous tracks.
To go to another track directly using the number buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5. For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
To check the clock time while playing back CD
On the remote control ONLY:
Press DISPLAY/CHARA.
•Each time you press the button, the disc informations and the clock time alternate on the display.
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1 Load a CD.
2 Press CD 3/ 8, then 7.
The source is changed to “CD.”
3 Press PLAY MODE repeatedly until “PROGRAM” appears on the display.
•Each time you press the button, play mode changes as follows:
PROGRAM |
| RANDOM |
|
|
| ||
(Program play) |
| (Random play) | |
Normal play
4 Press the number buttons to select the tracks.
•For how to use the number buttons, see “To go to another track directly using the number buttons” to the left.
CD indicator The current track
Program No.
Total playing time
Play mode
5 Press CD 3/ 8.
The tracks are played in the order you have programed. The Program play ends when all the tracks are played once.
To stop during play, press 7.
To exit from Program play mode, press PLAY MODE repeatedly so that the unit enters another playback mode (Random play or Normal play mode) before or after play.
