JVC UX-F70MD, UX-F72MD manual Playing Tracks in a Group Group Play

English

To check the program contents

Before playing, you can check the program contents by pressing 4 or ¢.

•4: Shows the programed tracks in the reverse order.

•¢: Shows the tracks in the programed order.

To modify the program

Before or after playing, you can erase the last programed track by pressing CANCEL. Each time you press the button, the last programed track is erased from the program.

To add tracks in the program before you start play,

press the number buttons to select track numbers you want to add.

To erase the entire program, press MD open/close 0to

eject the MD.

• Turning off the unit will also erase the program.

If you try to program a 33rd step

“MEMORY FULL” will appear on the display.

If your entry is ignored

You have tried to program a track number that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks.) Such entries are ignored.

If the total playing time is 150 minutes (2 hours and 30 minutes) or more

The total playing time will not be shown.

Playing at Random — Random Play

The tracks of the loaded MD will play at random.

On the remote control ONLY:

1 Insert an MD.

2 Press MD 3/ 8, then 7.

The source is changed to “MD.”

3 Press PLAY MODE repeatedly until “RANDOM” appears on the display.

•Each time you press the button, play mode changes as follows:

	PROGRAM		RANDOM
(Program play)			(Random play)
	Normal play	GROUP
		(Group play)

4 Press MD 3/ 8.

The tracks are played at random.

The current track

MD indicator

Group No. of the track

Elapsed

playing time

Recording
	Play mode
length mode

Random play stops when all the tracks are played once.

To stop during play, press 7.

To skip the current track, press ¢.

•You cannot go back to the previous tracks by pressing

4.

To exit from Random play mode, press PLAY MODE repeatedly so that the unit enters another playback mode before or after play.

Playing Tracks in a Group — Group Play

You can playback the tracks in the same group. To make a group etc., see pages 40 to 47.

On the remote control ONLY:

1 Insert an MD.

2 Press MD 3/ 8, then 7.

The source is changed to “MD.”

3 Press PLAY MODE repeatedly until “GROUP” appears on the display.

•Each time you press the button, play mode changes as follows:

	PROGRAM		RANDOM
(Program play)			(Random play)
	Normal play	GROUP
		(Group play)

4 Press 4or ¢while pressing MD GROUP to select a group.

– 25 –