English
3 Press SET.
•During playback:
The current track number starts flashing.
4 Press ¢or 4to select the two adjacent tracks you want to join.
•You can select the track using number buttons. In this case, the selected track starts playback repeatedly.
Ex. When you want to join tracks 1 and 2.
•During playback:
The selected track starts playback repeatedly.
5 Press SET.
“<JOIN>” appears on the display.
•To cancel the setting, press CANCEL, then repeat step 4.
6 Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the display while the editing you have made is being recorded on the MD.
To divide the joined tracks, see the DIVIDE function on page 50.
If “CANNOT JOIN” appears in step 5
You cannot join the following tracks.
•Tracks recorded using different recording length modes (SP, LP2, LP4) (see page 31.)
•
•Tracks recorded using monaural long recording method (not possible on this unit) and
When the tracks belongs to a group
If the preceding track of two tracks you want to join belongs to a group, the newly joined track will belong to the same group; Otherwise, the joined track will not belong to any groups.
Moving a Track — MOVE
This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like. Once a track is moved, the tracks and the other groups are renumbered.
•To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1 Insert an MD to edit.
2 Press MD TITLE INPUT/EDIT repeatedly until “MOVE ?” appears on the display.
The source changes to “MD.”
•Each time you press MD TITLE INPUT/EDIT, the edit mode changes as follows:
DISC TITLE? 
DIVIDE ?
JOIN ? 
MOVE ?
Canceled 
ALL ERASE? 
ERASE? 
• If you want to stop this editing process, press CANCEL.
3 Press SET.
•During playback:
The current track number starts flashing.
4 Press ¢or 4to select a track you want to move.
•You can select the track using number buttons. In this case, the selected track starts playback repeatedly.
Ex. When you want to move track 2.
•During playback:
The selected track starts playback repeatedly.
5 Press SET.
• To cancel the setting, press CANCEL, then repeat step4.
6 Press ¢or 4 to select the position where you want to move the track.
•You can select the track using number buttons. In this case, the selected track starts playback repeatedly.
Ex. When you want to move track 2 to the position of track 7.
•During playback:
The selected track starts playback repeatedly.
•To cancel the setting, press CANCEL, then repeat step4.
7 Press SET.
“<MOVE>” appears on the display.
• To cancel the setting, press CANCEL, then repeat step4.
8
