English
Turning On the Power
When you press the play buttons (CD 3/ 8, MD 3/ 8, TAPE 23) for a particular source or the FM/AM/AUX button (or FM/AM or AUX button on the main unit), the unit automatically turns on (and starts playback if the source is ready).
To turn on the unit without playing, press
STANDBY/ON.
The STANDBY/ON lamp on the electronic swing panel lights green.
To turn off the unit (on standby), press
STANDBY/ON again.
The STANDBY/ON lamp on the electronic swing panel lights red.
• “0:00” appears on the display until you set the
•A little power is always consumed even while the unit is on standby.
To set the
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
When you unplug the AC power cord or if a power failure occurs
The clock setting, the tuner preset stations and other settings will be erased.
Selecting the Sources and Starting Play
To select the tuner or external equipment, press FM/AM/AUX.
The unit automatically turns on (when the unit is on standby) and the last selected source appears on the display.
• Each time you press the button, the sources change as follows:
FM 
AM
(TUNER)
AUX
•When you change the source from the others, “TUNER” appears for a while.
•For more detailed tuner operations, see pages 14 to 16.
•For operating the external equipment, see the manuals supplied with them.
When using the main unit:
•Press FM/AM to select the tuner.
–Each time you press the button, the band alternates between FM and AM.
•Press AUX to select the external equipment.
To select the CD player, press CD 3 / 8.
The unit automatically turns on (when the unit is on standby), and “CD” appears on the display. Play will start if a CD is on the disc tray. (“NO DISC” will appear on the display if a CD is not loaded.)
To stop playback, press 7.
• For more detailed operations, see pages 17 to 21.
To select the MD player, press MD 3/ 8.
The unit automatically turns on (when the unit is on standby), and “MD” appears on the display. Play will start if an MD is in the MD loading slot. (“NO DISC” will appear on the display if an MD is not loaded.)
To stop playback, press 7.
• For more detailed operations, see pages 22 to 26.
To select the tape, press TAPE 23.
The unit automatically turns on (when the unit is on standby), and “TAPE” appears on the display. Play will start if a tape is in the cassette holder. (“NO TAPE” will appear on the display if a tape is not in the cassette holder.) To stop playback, press 7.
• For more detailed operations, see pages 27 and 28.
