Continued
English
Assigning the Disc Title, Track Title and Group Title
You can assign a name to each MD, to each track and to each group using alphabetic characters (uppercase and lowercase), symbols and numerals. Once a title is assigned, it is displayed for your confirmation.
About the number of characters inputted for an MD
The total number of characters that can be input for an MD is 1792. The maximum number that can be input for a disc title is 64, and for each track, 61. (However, the actual number you can input may be slightly less than this maximum numbers due to the MD limitations — see page 63.)
•A space can be counted as one character.
•When the stereo
•You can input up to 10 characters for each track if an MD is composed of 120 tracks recorded using the stereo long- hour recording method.
In the following example, the process is explained from the very first — that is, inserting a disc. If you have already started recording or playing, start from step 2.
•To exit from the title entry screen any time during process, press MD TITLE INPUT/EDIT.
1 Insert an MD to edit.
2 Press MD TITLE INPUT/EDIT.
The source is changes to “MD.”
The MD recorder enters one of the following title entry screen.
•Disc title entry screen: appears when you press MD TITLE INPUT/EDIT while the MD recorder stops.
•Track title entry screen: appears when you press MD TITLE INPUT/EDIT while playing, pausing or recording.
•Group title entry screen: appears when you press MD TITLE INPUT/EDIT while pressing MD GROUP.
3
4
5
Press = or +to change the title entry mode.
•Disc title and track title entry screen: Each time you press the button, the title entry mode changes as follows:
DISC TITLE? 
1 TITLE? 
2 TITLE?
Last track |
| •••• |
| 3 TITLE? |
|
|
•Group title entry screen: Each time you press the button, the title entry mode changes as follows:
GR 1 TITLE? 
GR 2 TITLE? 
Last group |
| •••• |
| GR 3 TITLE? |
|
|
•
Press SET to enter the selected title entry mode.
Ex. When assigning a disc title.
Input a character.
1)Press DISPLAY/CHARA to select the character set you want.
•Each time you press the button, the character set is selected in sequence as follows:
Capital letters |
| Small letters |
& Symbols |
| & Symbols |
Numerals 
2) Press the character entry button for a character you want to input.
Ex.:
•To input an “A” or “a,” press ABC once. To input a “B” or “b,” press ABC twice.
To input a “C” or “c,” press ABC three times.
•To input a symbol, press MARK repeatedly until the mark you want appears.
•To input a numeral, press 0 – 9.
•To enter a space while entering a title, press = twice.
•To move the character entry position while entering a title, press = or +.
•If you have entered an incorrect character, press CANCEL to cancel the last entry.
– 54 –
