JVC UX-F72MD, UX-F70MD manual Playing Back a Tape, To play both sides Reverse Mode

Playing Back a Tape

You can play back type I, II, and IV tapes.

1 Press TAPE EJECT 0.

The cassette holder opens.

Cassette holder

To stop during play, press 7.

To fast-wind to the left or to the right, press 4or ¢.

To remove the cassette, press TAPE EJECT 0.

DO NOT press TAPE EJECT 0 during tape play.

English

EJECT

TAPE

2 Put a cassette in with the exposed part of the tape in front.

Cassette holder

To play both sides — Reverse Mode

You can set the deck to play just one side of a tape, both sides once, or both sides continuously.

On the remote control ONLY:

Press REV. MODE.

•Each time you press the button, the reverse mode changes as follows:

: To only play back one side (front or reverse).

: To play back the front and reverse sides once.

: To play back both front and reverse sides continuously.

	To check the clock time while playing back a tape
A	On the remote control ONLY:
	Press DISPLAY/CHARA.
EJECT	• Each time you press the button, the source indications
TAPE
	and the clock time alternate on the display.

3 Close the cassette holder gently.

4 Press TAPE 23.

The unit automatically turns on and the tape play starts.

•Each time you press the button, the tape direction changes as follows:

:plays the front side.

:plays the reverse side.

Tape indicator

Reverse mode

Tape direction

When the tape plays to the end, the deck automatically

stops if the reverse mode is set to or . (See “To play both sides — Reverse Mode” to the right.)

The use of the C-120 or thinner tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinchrollers and the capstans.

– 28 –