Teac AD-800 Identifying the Parts (Main Unit)

Identifying the Parts (Main Unit)

1 2 3 4 5 6 7 8 9 10 11 12 13

33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17

1Display

See “Display” on page 14.

2Remote sensor

When operating the remote control, point it towards here.

3 OPEN/CLOSE (-)

Press this button to open and close the disc tray.

4 COUNTER RESET

Press this button to reset the tape counter to “0000”.

5REC LEVEL knob

Turn this knob to adjust the recording level.

6 Skip (/)/Search (N/)

Press these buttons to skip through tracks/files.

Hold down these buttons to search for part of a track/file.

7 REPEAT

Use this button to set the repeat function (page 20).

8SOURCE

Use this button to select the source (page 17).

9 Stop ())

Press this button to stop cassette tape playback. Press this button to stop recording to a tape.

10

10RECORD USB

Use to record to an external USB storage device. Press it once to enable recording standby, and press it again to start recording (page 29).

Press it during recording to divide the file at that point (page 30).

11RECORD TAPE

Use to record to a tape. Press it once to enable recording standby, and press it again to start recording (page 32).

12 Fast-forward/Rewind (N/)

Press these buttons to fast-forward/rewind the cassette tape.

13 Pause (+)

Press this button to pause cassette tape playback or recording. Press this button again to resume playback or recording.

14 Cassette tape compartment

15PHONES jack/LEVEL knob

To listen with headphones, turn the LEVEL knob to minimize the volume level before connecting the headphones plug to the PHONES jack. Then, adjust the volume after connecting the plug.

CAUTION

Do not connect headphones to the PHONES jack while wearing them. Moreover, do not disconnect headphones or turn the unit on or off while wearing them. Very loud sound could be output from the headphones.

AVOID DAMAGING YOUR HEARING—Do not put on headphones until after plugging them in.