5Set the DOLBY NR (noise reduction) switch.

Set the switch to the ON position when playing back tapes recorded with Dolby NR.

To play tapes recorded without Dolby NR, set the switch to the OFF position.

About Dolby NR

Dolby NR is designed to reduce tape hiss, a noise introduced during the recording and playback processes. This cassette deck is equipped with Dolby B-type noise reduction.

6Press the Forward (U) or Reverse (H) play button to start playback.

Forward (U) play

Pressing this button starts playback of “side A”.

When the reverse mode is set to V

Playback stops when the end of “side A” is reached.

When the reverse mode is set to K

Playback continues on “side B”, stopping at the end of “side B”.

When the reverse mode is set to Q

Playback cycles through both tape sides 5 times.

Reverse side (H) play

Pressing this button starts playback of “side B”.

When the reverse mode is set to Vor K

Playback stops when the end of “side B” is reached.

When the reverse mode is set to Q

“Side B” is played back, and then playback cycles through both tape sides 4 times.

Pausing playback temporarily

Press the TAPE Pause (+) button during playback to stop playback at the current position.

To resume playback, press the TAPE Pause (+) button again or press the Forward/Reverse play (Hor U) button.

ENGLISH

Stopping playback

Press the TAPE Stop ()) button to stop playback.

Opening the cassette tape compartment

When the tape is stopped or paused, press the TAPE EJECT (-) button to open the cassette tape compartment.

You can also open the compartment when in modes other than TAPE mode.

25