Basic Operation

Turning the unit on or off

Press the POWER button to turn the unit on or off.

When the unit turns on, the display lights.

Check the POWER ON START switches that determine what the unit does when the power is turned on.

When the power is turned on, and the POWER ON START (OFF-PLAY-REC) switch for the timer is set to PLAY or

REC

or

The source set with the POWER ON START (CD-TAPE- USB) switch starts playback/recording.

The timer recording can only record to cassette tape (page 35).

When the power is turned on, and the POWER ON START (OFF-PLAY-REC) switch for the timer is set to OFF

The source set with the POWER ON START (CD-TAPE- USB) switch becomes the active source.

When you do not want to use the timer, be sure to set the OFF- PLAY-REC switch to the OFF position to prevent accidentally recording over an important cassette tape.

Selecting a source for playback/recording

Each time the SOURCE button is pressed, the source changes as follows:

ENGLISH

The selected source is shown on upper left of the display.

During recording, the source cannot be changed.

Pressing the play button for a source also selects and starts playback of that source.

Select “LINE” to use an external source connected to the LINE jacks.

Listening with headphones

To listen with headphones, turn the LEVEL knob to minimize the volume level before connecting the headphones plug to the PHONES jack. Then, adjust the volume after connecting the plug.

CAUTION

Do not connect headphones with the PHONES jack while wearing them. Moreover, do not disconnect headphones or turn the unit on or off while wearing them. Very loud sound could be output from the headphones.

AVOID DAMAGING YOUR HEARING—Do not put on headphones until after plugging them in.

17