After all connections are complete, connect the power cord’s plug to the AC wall socket.

<Read the instructions of each component you intend to use with this unit.

<Be sure to connect each plug securely. To prevent hum and noise, do not bundle the connection cords.

EDigital audio output terminal

Digital audio from DVD-Video, CD and video CD is output from this terminal.

Connect an amplifiers including a decoder, or digital audio devices such as CD recorders, etc. to this terminal using commercially-available coaxial digital audio cable (TOS).

<Select “ALL” or “PCM only” in the DIGITAL AUDIO SETUP (DIGITAL OUTPUT) (page 35).

FAUX 1/LINE OUT jacks

Analog 2-channel audio signal is input or output from these jacks. Connect a cassette tape deck etc. to these jacks using commercially-available RCA cables.

Make sure to connect:

White plug e White jack (L: left channel)

Red plug e Red jack (R: right channel)

GPower cord

After all other connections have been made, connect the AC power cord into the wall socket. Ensure that your AC voltage corresponds to the voltage marked on the rear panel of the unit. Consult a qualified electrician if you are in doubt.

<If you are not going to use the unit for some time, disconnect the power cord from the wall socket.

13