Settings (GENERAL SETUP)

TV DISPLAY

The shape of the TV or monitor may not match the shape of the movie frame. To avoid distortion on older TVs, you may need to change the way in which the image is displayed. TVs use a 4:3 aspect ratio; high-definition TVs use 16:9 aspect ratio (as do movies).

Note:

You may need to read your TV’s manual in conjunction with this section in order to achieve the best results. Some discs do not allow the aspect ratio to be changed and you will therefore have to change the aspect ratio on the TV.

Make this setting while playback is stopped; you cannot do this while playing back a disc.

4:3 PAN SCAN

This mode is used with 4:3 TVs. 4:3 images are displayed normally. When showing 16:9 programmes, the full height of the screen is displayed, and the left and right part of the image are cut off.

4:3 picture

16:9 picture

4:3 LETTER BOX

This mode is used with 4:3 TVs. 4:3 images are displayed normally. 16:9 images are visible at their full width, but there are blank area at the top and bottom of the screen.

4:3 picture

16:9 picture

16:9

Use with a 16:9 wide TV.

4:3 picture

16:9 picture

<Some wide-screen discs that do not permit the Pan Scan mode playback are automatically played in Letter Box mode.

<Depending on the DVD, 4:3 Letter Box may be selected automatically instead of 4:3 Pan Scan and vice versa.

<If 16:9 (Wide) is selected and a normal TV is connected, 16:9 content will appear distorted during playback (objects look thin).

OSD (On Screen Display) LANGUAGE

Select the desired language for on-screen menus of MC-DV600 from the following:

ENGLISH (Default)

FRANÇAIS

ESPAÑOL

SCREEN SAVER

ON (Default)

The screen saver starts up if nothing is played back and no operations are performed for 4 minutes.

OFF

The screen saver does not start up.

34