Teac MCDV600 Listening to the FM Radio

1Select “FM Radio” using the FUNCTION button.

<You can also select “FM Radio” by pressing the FM button on the remote control unit.

2Hold down the TUNING (m or ,) button for more than 1 seconds to select the station you want to listen to (Auto selection).

Hold down more than 1 sec.

The unit starts searching for a station.

When a station is tuned in, the tuning process will stop automatically.

Repeat this step until the station you want to listen to is found.

<If you want to stop the tuning process, press the TUNING button.

Selecting stations which cannot be tuned automatically (Manual selection)

When the TUNING button is pressed momentarily, the frequency changes by a fixed step.

Press the TUNING button repeatedly until the station you want to listen to is found.

FM MODE

Pressing this button alternates between Auto (Stereo) mode and Mono mode.

Auto Mode

FM stereo broadcasts are received in stereo.

Mono Mode

To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise.

If the reception is poor

For the best reception, rotate the antenna until you get stations clearly.