ARemote sensor
Receives signals from the remote control unit. Point the remote control unit at this sensor when operating the remote control unit.
BDisplay
CDisc tray
DVOLUME
Turn this knob to adjust the volume level.
ESkip (.//)/PRESET
In FM mode, use these buttons to select a preset channel.
In DISC or USB mode, use these buttons to skip tracks/files.
FStop ( H)
In DISC or USB mode, use this button to stop playback.
GPlay/Pause (G/J)
In DISC or USB mode, use this button to start or pause playback.
HOPEN/CLOSE (L)
Use this button to open and close the disc tray.
When the tray is opened during playback, it may take a few seconds before the disc is “unloaded” and the tray opens.
IFUNCTION
Use this button to select a source.
JPROGRAM
In FM mode, use this button to preset stations.
In DISC or USB mode, use this button to program tracks.
KSearch (m/,)/TUNING
In FM mode, use these buttons to tune in to a station.
In DISC or USB mode, use these buttons to search for a part of a track/file.
LREPEAT
In DISC or USB mode, use this button for Repeat or Shuffle Playback.
MUSB connector
You can connect an USB memory device to this connector.
NAUX 2 IN
You can connect a portable audio player to this jack.
OPHONES
To listen with headphones, first lower the volume level to the minimum. Then, connect the headphones plug into the PHONES jack, and adjust the volume by turning the VOLUME knob.
The speakers will make no sound when headphones are plugged in.
CAUTION
Do not connect headphones with the PHONES jack while wearing them. Moreover, do not disconnect headphones or turn the unit on or off while wearing them. Very loud sound could be output from the headphones.
AVOID DAMAGING YOUR HEARING - Do not put on headphones until after plugging them in.
PSTANDBY/ON
Use this button to turn the unit on and standby.
The illumination turns off when the unit is turned on.
The illumination lights orange when the unit is in the standby mode.
15