DTH211_EN_0210 11/02/03 11:34 Page 24
Menus
Digital output
According to the amplifier or TV set (with or without an
1.In the player menu (with the player running, but no disc in play), highlight the Sound function and press OK on the remote control unit (the Sound menu appears).
2.Press 
to highlight Digital Output and press OK (the settings screen appears).
3.Select Dolby Digital or DTS using the 
or 
key and press OK on the remote control unit to validate your choice.
4.To return to the player menu, press 
until the menu is displayed on the screen.
Note: By ticking DTS and Dolby Digital you will not have to change this setting again.Your player will automatically recognise the sound format of a DVD disc in playback and will send the appropriate signal to the appliance connected to the coaxial and optical out sockets.
If you do not tick either of these two settings the digital sound present in the coaxial out socket will be a PCM digital sound for all discs (in the case of DTS discs no sound will be heard).
If you set the digital outputs on DTS, you must connect it to an amplifier with a DTS decoder, and the DVD disc that you play must include a DTS sound, otherwise no sound will be heard.
PCM - If the appliance connected to the coaxial out socket does not accept Dolby or DTS signals your player can send it PCM (Pulse Code Modulation) signals. In that case, neither Dolby Digital, nor DTS must be ticked. The linear PCM is a signal recording format used for CDs.
DTS - is a digital sound compression technique developed by Digital Theater Sound Systems for digital audio multichannel signals. “DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems inc.
Dolby Digital is a sound compression technique developed by Dolby for
«Dolby Digital» and the
24
